Circular Saw Safely On-Site

How to use Circular Saw Safely On-Site

The use of a circular saw requires you to understand how best to use every sawing accessory. A guide rail is one of those accessories that you should master when you want to use a circular saw. While you will find it easy to learn, it is important that you also understand how you can use it safely.

In this post, I will give you simple safety tips that will help you to work with your best circular saw on-site for your next big wooden project. Take a look at every one of them.

Loose Clothing is a Hazard

Loose clothing, hair, or jewelry shouldn’t be worn. These loose objects can be pulled into the saw blade leading to individual harm. If you have long hair, you should tie it in a knot and wear a helmet on top of it.

Necklace and chains should be left at home and you should be in full on-site gear. This will include overalls, dust masks, and any other ideal protection gear.

Use the Safety Key

Whether you are using the guide rails for circular saws or simply switching your saw on and off when taking a break, ensure that you master the use of safety. Most top-rated circular saws will come with the safety key that you should keep in your pocket whenever you aren’t using the saw.

Set the Right Cutting Depth

During cutting, set the cutting depth as shallow as possible to prevent the blade from protruding more than an inch below the surface being cut. This prevents unintended consequences from unseen parts of the blade.

It is also good at addressing any form of warping and will leave you with the best finish on your cuts. Most of the time, the blade will also cut what it is meant to cut rather than going beyond the intended depth of cut.

Strictly use a Sharp Blade

Efficiency is key in getting smooth cuts. It is, therefore, important that you check the blades for sharpness always. Where it’s dull, kindly sharpen it to reduce energy wastage and safety risks. Importantly, do not tighten the blade cutting nut than is necessary since the blade may break.

Final Verdict

Simple as it may look; in case you have incorporated the use of guide rails for circular saws you should also learn the best blade changing technique. It will come in handy when you want to sharpen your blade.


Related Articles

0 Comment

Leave a Comment

Your email address will not be published. Required fields are marked *